Indos

"Sed praeter physicos Homerumque qui universum orbem mari circumfusum esse dixerunt, Cornelius Nepos ut recentior, auctoritate sic certior; testem autem rei Quintum Metellum Celerem adicit, eumque ita rettulisse commemorat: cum Galliae pro consule praeesset, Indos quosdam a rege Botorum dono sibi datos; unde in eas terras devenissent requirendo cognosse, vi tempestatium ex Indicis aequoribus abreptos, emensosque quae intererant, tandem in Germaniae litora exisse. Restat ergo pelagus, sed reliqua lateris eiusdem adsiduo gelu durantur et ideo deserta sunt."Pomponius Mela
De chorographia, Liber III

"Mais à l'autorité des anciens philosophes et d'Homère, qui ont prétendu que la terre était de tous côtés environnée par la mer, on peut ajouter celle de Cornélius Nepos, qui, étant plus moderne, est par conséquent plus sûr. Or, cet auteur rapporte, à l'appui de cette opinion , le témoignage de Q. Metellus Celer, auquel il fait dire qu'étant proconsul dans la Gaule, le roi des Botos lui fit présent de quelques Indiens , et que, s'étant informé d'où ils étaient venus, il apprit que, les tempêtes les ayant emportés loin de la mer des Indes, ils avaient été jetés, après un long trajet, sur les rivages de la Germanie. Le reste de la côte asiatique est donc baigné au nord par une mer sans bornes; mais cette partie est couverte de glaces éternelles, et par conséquent déserte."
Louis Baudet translation

To the ancient philosophers and Homer, who claimed that the land was surrounded on all sides by the sea, we may add Cornelius Nepos, who, being more modern, is therefore more reliable. However, this author reports in supporting this fact, the witness of Q. Metellus Celer: when he was proconsul in Gaul, the king of Botos  made ​​him a present of a few Indians, and that, being informed of where they came from, he learned that the storms have swept away them of the Indian Ocean. They were thrown, after a long journey, on the shores of Germania. The rest of the northern Asian shores are surrounded by the sea, but this part is covered with eternal ice, and therefore deserted.

King Arthur's round table

According to Telegraph, http://www.telegraph.co.uk/news/uknews/8724183/King-Arthurs-round-table-may-have-been-found-by-archaeologists-in-Scotland.html, 26 Aug 2011, King Arthur's round table may have been found by archaeologists in Scotland. In fact, the archaeologists  have found a "circular feature" beneath the historic King's Knot in Stirling. The King's Knot is a geometrical earthwork in the gardens below Stirling Castle. The design of the Knot that we see today dates from the 1620s, but its central mound could  be much older. It seems that some writers going back more than six centuries have linked the landmark to  King Arthur. Archaeologists from Glasgow University, working with the local Archaeological Society, found that the round feature on the site pre-dates the visible earthworks.

For a discussion on the King's Knot

see please "The orientation of the King's Knot of Stirling Castel" at

http://www.philica.com/display_article.php?article_id=549

How to measure the stair angle

According to the site of Duradek http://duradekmidatlantic.com/durarailchecklisthelp.html you can
use a protractor (available at most hardware stores) to determine this angle.

Lay a straightedge across a minimum of 3 stair nosings. Put your universal protractor on the straightedge and measure the angle. Note that the more stair nosings you have under the straightedge, the more accurate the angle will be. In the case that the run of stairs is very long, measure the stair angle at 2 or 3 places along the run to check that the angle remains constant along the full run.


I am proposing that Kha the architect at Deir El-Medina, Egypt, supervisor of the projects of three kings of the 18th Dynasty used his protractor to check the inclination of stairs for instance. You can see it at the Egyptian Museum of Torino. Read more at http://stretchingtheboundaries.blogspot.com/2011/08/khas-protractor.html

A modern universal protractor for building is that shown in the following figure.

Kha

 

Kha, the architect

Museo Egizio, Torino 

Back to Kha's protractor

In the post "Kha's protractor", I have discussed an object found in the tomb of  an ancient egyptian architect, Kha.  It can be used to measure angles.Plums, levels, protractors , compasses and so on are instruments for surveying. See http://en.wikipedia.org/wiki/Surveying and the table http://en.wikipedia.org/wiki/File:Table_of_Surveying,_Cyclopaedia,_Volume_2.jpg
In this table there is the image of a compass rose. We can start from it and go back to the Kha's rose.

Romans in America?

From the paper "History Mystery: Ancients in America", by Stephen Wagner, About.com Guide"Many of us learned that rhyme, part of a longer history poem, when being taught in school that Christopher Columbus discovered America. Although nothing can be taken away from Columbus' daring voyage, he certainly was not the first to arrive on the shores of the Americas. For one thing, there were already people here - many Native American nations inhabited what later became known as North and South America and even the Caribbean islands where Columbus landed. Columbus probably wasn't even the first "white man" to make it here. It's fairly well documented that Icelander Leif Ericsson successfully sailed to North America in the year 1000 - almost 500 years prior to Columbus's voyage.
In fact, there's a growing amount of evidence suggesting that a lot of the familiar history of human exploration and "discovery" by our ancestors as we were taught it may be quite wrong. There is hard evidence of ancient civilizations making their mark in places where, according to traditionally accepted history, they just shouldn't be. Here's an overview of some of the most remarkable and fascinating cases."
read more
At http://paranormal.about.com/od/ancientanomalies/a/History-Mystery-Ancients-In-America.htm

Fairy chimneys in Peru

Fairy chimneys in Peru , Amelia Carolina Sparavigna, Dipartimento di Fisica, Politecnico di Torino, Torino, Italy

The erosion of water and wind on the rocks is able to create beautiful landscapes. Some places are well-known and have been declared natural heritage sites by UNESCO; some others are in desert and hostile regions, hard to visit. In most cases, just the local population knows these landscapes. In this post we will see that the simple action of some users of World Wide Web services, such as the Google Maps, in uploading their pictures, allows the discovery, study and perhaps future preservation of some of them. We will see in particular the case of some fairy chimneys in Peru, in the district of Pampachiri, Apurímac.

Before talking about this Peruvian landscape, let us discuss briefly the nature of these rocky structures, tall and thin cusps of rock protruding from the land. They are named in several manners [1]. These pinnacles are considered as "tent rocks", "fairy chimneys" or simply "earth pyramids", according to their shapes. Another name is “hoodoo": at first sight, this name seems to be derived from "hood" because of the structure looking like a sort of "dwarf hat", but probably its etymology is different [2]. Hoodoo is the common term used to describe the rock chimneys found in the western United States and Canada.

The fairy chimneys consist of a relatively soft rock. Some of them have on the top a harder stone, less easy to erode: the result is a geological structure resembling that of a chimney. These structures typically arise within sedimentary rocks or volcanic formations. The height of these chimneys can be of tenths of meters. Their shapes are affected by the existence of different and alternate layers of materials having different strength. In some regions, there are the freezing of water and the gravity that are creating these structures. The process is known as "frost wedging". The water, that percolates in the cracks of rocks, freezes and then expands, acting as a wedge and breaking the rocks apart [1,3]. This is the same action chiseling the landscape of Dolomites, the mountain range located in northeastern Italy [4]. During the night, when the temperature goes below the freezing point, the water into the fractures of rock turns into ice. The corresponding expansion of volume increases the distance between the sides of fractures. During the day, the sun warms the rocks and water melts. So separated from the bulk, some parts of the rock fall for gravity. In the case that the fairy chimneys are made by tuff rocks from volcanic eruptions, the erosion is due to wind and rain. In Italy, there are several areas with gullies (calanchi) and pinnacles, chiseled by water and wind. Well-known are the Calanchi di Volterra in Tuscany, but several others interesting places are in Abruzzo [5].

Among the best-known landscapes having fairy chimneys, there is that of Cappadocia, Turkey [6]. Besides the importance of this geophysical area, the region is quite interesting because Cappadocians carved their homes into the soft rock (see Fig.1). During the medieval era, this area becomes a refuge for Byzantine Christians. The people established monastic settlements and churches inside the pinnacles. According to [6], the Göreme Open-Air Museum in Cappadocia has the best-preserved collection of chapels and houses, most dating about the 11th Century [7]. The life in Cappadocia was even more complex, because, due to the persecution, the local Christians often had to hide themselves. It seems that, alarmed by the hoof beats [6], they could abandon the caves in the pinnacles to find a refuge in the underground. Beneath the ground of Cappadocia, archaeologists found a network of subterranean villages, the largest discovered is almost 10 levels deep, with narrow passages among them [6-9].

Fig.1. Fairy chimneys in Cappadocia (picture by Zeynel Cebeci, of a site at Ürgüp - Nevşehir, Turkey).

Not only Cappadocia has some houses inside the natural chimneys. We can find them also in Peru, near Pampachiri and San Pedro de Larcay. This is a region having several interesting places for geophysical and archaeological researches. In fact, there is the archaeological site of Wallpa Wiri, having structures of Incas age [10,11]. Moreover, this region possesses a large structured system of carved stones, used as landmarks for agricultural purposes, system created in the Late Horizon period of Peruvian prehistory [11]. Analyzing this landscape within its agricultural and social context [11], the researcher provided evidence of water distribution and management of the irrigation cycles by the Incas; that is, there was an administration and management of the local agricultural processes by the central government. A survey of the region with Google Maps reveals the presence, at south-west of San Pedro, coordinates -14.178624,-73.592713, of several "qochas", ponds with a diameters of about 100 meters (see Fig.2).

Fig.2. Qochas near San Pedro. The average size is about 100 meters.

Linked together by a network of canals, qochas form a system of water and soil management [12]. This system is probably of pre-Incaic origin.

Unfortunately, the satellite map corresponding to this area has a limited resolution. However, Google Maps has an interesting feature: it is possible to drag the icon of the street view on the map and see if there are photos of the landscape uploaded by users. Doing this dragging, the location of the pictures appears as blue dots on the map (see Fig.3). In this manner, anybody using the map can have some information on the landscape corresponding to the specific location. There are no photos of the qochas of San Pedro, but many pictures of nearby locations, uploaded by Max Altamirano Molero [13]. Besides being very beautiful, the pictures display the existence of a forest of fairy chimneys. The location in the Pampachiri district is given in the map of Fig.3.

Fig.3. The position of San Pedro de Larcay, Peru, in the district of Pampachiri is given by the green arrow. The location of the fairy chimneys is given by the blue dots corresponding to the photo

Fig.4. The image shows a part of the very interesting set of images by Max Altamirano Molero. To see them, the reader can visit [13].

To the author’s knowledge, the pictures by Altamirano are among the best existing documentations of fairy chimneys in Peru . In fact, among the pictures that Altamirano has collected on a site (see Fig.4 and directly at [13]), several images are showing that some dwelling places have been obtained under or inside the fairy chimneys. It seems, as far as it is possible to gain from his pictures that a supporting structure of stones had built to reinforce the chimney (Fig.5). Only a local survey and analysis can tell how many and how old these structures are. For me, a physicist, it is also interesting to model their thermodynamic behavior, such as that of the chimneys in Cappadocia, to see if there are some thermal benefits in using them as houses.

In conclusion, we have seen that a fairy chimneys landscape exists in Peru, where some of the chimneys seem used as dwelling places. Moreover, the documentation of these remarkable structures is due to the activity of a Google Maps user, demonstrating that each user can help in the process of spreading the knowledge of existing cultural landscapes.

Fig.5. This image is adapted from a picture by Max Altamirano Molero, to show the importance of the pictures he collected. Note how the fairy chimneys had been transformed in a dwelling place.

References

1. Frank R. Spellman, Geography for Nongeographers, Government Institutes, 2010

2. www.scienceclarified.com/landforms/Ocean-Basins-to-Volcanoes/Plateau.html

3. How do you make a Hoodoo?, Bryce Canyon National Park,

 www.electronicfieldtrip.org/bryce/lessons/Lesson1.pdf

4. In August 2009, the Dolomites were declared a natural heritage site by UNESCO.

5. Roberto D’Andrea, Il Geosito dei Calanchi di Atri, Tesi di laurea, 2007, Università degli studi “G. d’Annunzio” di Chieti.

6. James Bainbridge, 30 May 2011, BBC, www.bbc.com/travel/feature/20110421-turkeys-land-of-fairy-chimneys

7. Spiro Kostof, Caves of God: Cappadocia and its Churches, Oxford University Press, 1989

8. Lyn Rodley, Cave Monasteries of Byzantine Cappadocia, Cambridge University Press, 2010

9. Thomas Krassmann, Unterirdische Städte in Kappadokien, http://www.mineral-exploration.com/mepub/kaymakli.pdf

10. Rocio Ferrel, ConNuestroPeru, private communication, 2011.

11. Frank Meddens, Rocks in the Landscape: Managing the Inka Agricultural Cycle, The Antiquaries Journal, 86, 2006, pp 36–65

12. Amelia Carolina Sparavigna, Qochas on Andean highlands, Archaeogate, May 5,  2011.

13. Photos by Max Altamirano Molero, in the Google Earth (KML), see also Panoramio, http://www.panoramio.com/user/4345310

Speed of neutrinos and cosmic consequences

Let me report a part of the discussion on the speed of neutrinos by Wikipedia
"In September 2011 the OPERA collaboration released calculations showing velocities of 17-GeV and 28-GeV neutrinos exceeding the speed of light in their experiments. The authors write, "Despite the large significance of the measurement reported here and the stability of the analysis, the potentially great impact of the result motivates the continuation of our studies in order to investigate possible still unknown systematic effects that could explain the observed anomaly." This result had not been detected by previous experiments, and lies in contrast to several others. For instance, photons and neutrinos from SN 1987A were observed to have an agreement in transit time to about 1 part in 450 million, with even this difference being accounted for by light being impeded by the material of the star early in its journey. The OPERA results, in contrast, suggested that neutrinos were traveling faster than light by a factor of 1 in 40,000, i.e. that neutrino speed is 1.0000248(28)c. Had neutrinos from SN 1987A (a supernova, approximately 168,000 light-years from Earth, http://en.wikipedia.org/wiki/SN_1987A) traveled faster than light by this factor, they would have arrived at Earth several years before the photons; this was not observed to be the case. However, neutrinos from the supernova had orders of magnitude less energy than the neutrinos observed in the OPERA experiment, as the authors point out."

Neutrino: fast and furious

Here the news of the day!Neutrinos are faster than light!
http://www.guardian.co.uk/science/2011/sep/23/faster-light-neutrinos
"Scientists at the Opera (Oscillation Project with Emulsion-tRacking Apparatus) experiment in Gran Sasso, Italy, found that beams of neutrinos sent to its detectors from Cern, 730km away in Geneva, arrived earlier than they should have."

Coherers as “energy catalyzers”

Coherers as “energy catalyzers”

Amelia Carolina Sparavigna
Dipartimento di Fisica,
Politecnico di Torino, Torino, Italy

Abstract: A device defined as an “energy catalyzer”, able to give thermal energy at the expense of electric energy, has aroused a great popular interest. In fact, the confidence on this device does not allow its discussion. Some known features are intriguing, which can therefore become the starting point for a discussion on old coherers and the Branly effect. We could define the coherers as a sort of “energy catalyzers”.

------------

On Wednesday September 21, 2011, from the news of RAI, the Italian broadcaster, I learned that a new device for energy production was on the way for industrial developments. I had not immediately realized the features of this device, but I memorized the fact that it was based on water, nickel powders and current, that I saw sparkling in the video clip. After searching on the Web, I found that the announced device was the energy catalyzer, E-Cat, under patent request by its inventor, Andrea Rossi. The development of prototypes was due to the work of Rossi and Sergio Focardi, University of Bologna. It seems that they have announced a device able of producing more than 10 kilowatts of heat power, while only consuming a fraction of that. "On January 14, 2011, they gave the Worlds' first public demonstration of a nickel-hydrogen fusion reactor capable of producing a few kilowatts of thermal energy. At its peak, it is capable of generating 15,000 watts with just 400 watts input required. In a following test the same output was achieved but with only 80 watts of continual input" [1]. The item is also reporting that the inventor prefers to invoke a catalyzer process, not to a cold fusion. There are so many Web pages on the E-Cat, that it is impossible to list them, but an exhaustive one is the corresponding Wikipedia item [2]. It is there that we can find the reference to the patent [3], which is about a "method and apparatus for carrying out a highly efficient exothermal reaction between nickel atoms and hydrogen atoms, in a tube, preferably, though not exclusively made of a metal, filled by a nickel powder and heated to a high temperature preferably, though not necessarily, from 150 to 5000°C, by injecting hydrogen into said metal tube said nickel powder being pressurized, preferably, though not necessarily, to a pressure from 2 to 20 bars ".


The confidence on this device does not allow its discussion. And in fact, the aim of my paper is not a discussion on E-Cat, but on what the poor information on it suggested me. Some features of the device attracted my interest: they are the metal powders, the high temperatures and the sparks of electricity. In fact I read recently about all these things together in a old book published in 1904, entitled Element of Physics, by Fernando Sanford, professor at the Stanford University, one of the members of the group of scientists who came there to create the pioneer faculty in 1891. In [4], I discussed the experiments of Sanford on the electric photography and the fact that, several years after in 1939, the fringes around the electrically photographed objects had been rediscovered by Semyon Kirlian. Of course the book written by Sanford is quite old, but, in my opinion, it has to be appreciated due to the fact that it is based on the description of experiments. The book is then quite interesting from the point of view of experimental physics and for its history. A chapter is devoted to electric radiation and electric waves. Let us remember that Fernando Sanford was talking of experiments, which, at his times were revolutionizing physics and technology. Reading the book we learn that a new device was used in laboratories, the Coherer (see Fig.1). Let me report the Laboratory Exercise 119 of the book

"Take a glass tube of about a centimeter bore and six or eight centimeters long, fit the ends with corks through which copper wires can be passed, and fill the tube between the corks with brass or iron filings. Thrust copper wires through the corks and into the iron filings until their ends are one or two centimeters apart. Connect these wires in circuit with one or more voltaic cells and a tolerably sensitive galvanometer. The resistance of the filings to the passage of a current should be so great that the galvanometer is slightly, if at all, deflected. Bring an electric machine near, and pass sparks from one discharging knob into one of the wires which enter the tube. The resistance should fall so that the galvanometer is deflected through nearly 90°. This instrument is called a Coherer. The passage of the electric discharge into the small metallic particles in the tube apparently causes them to cling together so that they make better electric contact than before. After your coherer has become sensitive enough to allow the passage of a suitable current, increase its resistance again by tapping gently on the glass and causing the particles to separate. Then move the electric machine to a distance of a few feet from the coherer and turn the handle and cause sparks to pass between the discharging knobs of the machine. If your coherer has been properly adjusted, the galvanometer will be deflected again, showing that the resistance of the coherer has been again diminished. By a little care in the adjustment, and by using a sensitive galvanometer, the coherer will respond to a spark at a distance of several yards. ... The Coherer described above is similar to the receiver used in "wireless telegraphy." The Coherer is connected between a battery and a telegraph sounder, and is attached to a long wire or other conductor suspended at some height. A similar conductor is suspended at the sending station, and is connected with the spark gap of the electric machine or induction coil. The oscillations in the receiving conductor are accordingly partly due to resonance, and they are sufficient to lower the resistance of the coherer so that a signal can be made through it. An automatic tapper jars the particles apart, so that the signal is momentary unless the instrument is sensitized by another spark. "

Fig.1. The Coherer in the book written by F. Sanford.

The device described by Sanford is a radio signal detector used in the receivers of wireless telegraphy at the beginning of the twentieth century. The coherer was invented, around 1890, by Édouard Branly [5]. As described by Sanford, it consisted of a tube or capsule containing two electrodes spaced a small distance apart, with metal filings in the space between them. To have the Branly effect, it is necessary a thin resistive layer between the grains, to have an initial high resistance. The effect is not observed with noble metal grains, cleaned from any surface contaminant. The coherer works because the metal particles cling together, that is cohere after being subjected to the radio frequency electricity. This provokes a reduction in the coherer's electrical resistance, which is persistent after the radio signal. To receive another signal, the device needs a de-coherer mechanism, able to tap the coherer, mechanically disturbing the particles and resetting them to the high resistance state. As Wikipedia [5] is telling "Coherence of particles by radio waves is an obscure phenomenon that is not well understood even today", but several recent experiments with metal particles seem to confirm that particles cohere by a micro-weld phenomenon, caused by radio frequency electricity fluxing across the small contact area between particles. This phenomenon is probably involving a tunnelling of charge carriers across an imperfect junction between conductors, as deeply discussed in Ref.6. In fact, in this reference the author is proposing to relate the Branly effect to the induced tunnelling effect first described by François Bardou and Dominique Boosé, asserting then that the effect is mainly governed by an electrical tunnel effect [7].


In the work published in 2001 [7], Bardou and Boosé theoretically proposed that the tunnelling probability of a particle through a potential barrier could be enhanced by striking the particle when the centroid of its wave packet is reflecting on the barrier. This is applied to Branly effect as discussed in [6] in the following way. “In a granular metallic medium microscopic grains are electrically isolated one from the other by a metal oxide nanometric layer ... When a voltage is applied to the medium, electrons are accelerated and they do reflect on the potential barriers. At the time of the reflection, these electrons can be kicked forward or backward by the short electromagnetic pulses present in the external electromagnetic field. … The enhanced transmission induced by the momentum transfer produces an increased electrical current, that for some events become large enough to permit a local heating in the metal grains thanks to the Joule effect. Eventually a welding of the grains can occur and when a percolation path has formed the electrical resistance of the medium drops down going from an exponential dependence on the applied voltage to a linear one”. Reference 6 is also reporting that Auerbach demonstrated in 1898 that a coherer could be made conducting by an acoustic excitation in the audible range of the spectrum. According to [6], this means that acoustical wave, by giving vibrations to tunnel barriers between the metallic grains, could be responsible of an induced tunnelling.


Let us also consider the recent experiments with particle coherers by Falcon et al. [8]. They reported on observations of the electrical transport within a chain of metallic beads, which were slightly oxidised. As the applied current is increased, a transition from an insulating to a conductive state is observed. The authors are proposing that the transition comes from an electro-thermal coupling, at the micro-contacts between each bead. Due to these contacts, the current flows through them, generating a high local heating. This heating increases the local contact areas, enhancing the conduction. This current-induced temperature rise, up to 1050°C, results in the micro-soldering of the contact points, even for low voltages.


If we define an “energy catalyzer” as a device able to produce change in, or transform energy, the coherer acts in such a manner, where the catalyst is an electromagnetic pulse. Let us hope that as soon as possible, an open report on E-Cat is published, in order to understand the role of hydrogen in it. In this device, is any tunnelling present? Is it there a tunnelling able to give a fusion of nickel and hydrogen to have copper in a proton capture as told in [9]? Is there any kicking mechanism? What we find in [9] is that the paper is just reporting the results “obtained with a process and apparatus not described here (in [9]) in detail and protected by patent in 90 countries, consisting of a system whose heat output is up to hundred times the electric energy input. As a consequence, the principle of the conservation of energy ensures that processes involving other energy forms are occurring in our apparatus”. And in the conservation of energy we trust.


References

1. http://peswiki.com/index.php/Directory:Andrea_A._Rossi_Cold_Fusion_Generator

2. http://en.wikipedia.org/wiki/Energy_Catalyzer

3. http://www.wipo.int/pctdb/en/wo.jsp?IA=IT2008000532&DISPLAY=DESC

4. A.C. Sparavigna, Fernando Sanford and the "Kirlian effect", arXiv:1105.1266v1 [physics.pop-ph], http://arxiv.org/ftp/arxiv/papers/1105/1105.1266.pdf

5. http://en.wikipedia.org/wiki/Coherer

6. C. Hirlimann, Understanding the Branly effect, arXiv:cond-mat/0703495v1 [cond-mat.mtrl-sci], http://arxiv.org/ftp/cond-mat/papers/0703/0703495.pdf

7. D. Boosé and F. Bardou, A quantum evaporation effect, Europhys. Lett., 53, 1-7 (2001).

8. E. Falcon, B. Castaing, and M. Creyssels, Nonlinear electrical conductivity in a 1D granular medium, The European Physical Journal B, 38, 475-483 (2004)

9. S. Focardi and A. Rossi, A new energy source from nuclear fusion, http://www.lenr-canr.org/acrobat/FocardiSanewenergy.pdf